Chapter 1: hardware Setup
M-200 IPPBX Overview
Codecs & Protocols
- SIP 2.0 (RFC3261) / IAX2 compliant
- Audio Codec: G.722 / G.711-Ulaw / G.711-Alaw / G.726 / G.729 / GSM / SPEEX
- Video Codec: H.261 / H.263 / H.263+ / H.264
- DTMF: RFC2833, SIP INFO, In-band
Network Features
- DDNS Client
- DHCP Server / SNMP v1/v2
- IEEE 802.1Q of VLAN
- IPv4 / IPv6
- Manual Configuration of Static Route Table
- Troubleshooting (Ping, Traceroute)
Security Features
- VPN Client (Supports N2N / L2TP / PPTP / OpenVPN)
- VPN Server ( Supports PPTP / L2TP / OpenVPN Server)
- Permit IP for Extensions
- SIP Allowed Address
- Block SIP Register Failed
- Iptables Firewall / SRTP
Environment
| Working Temperature | 0 ~ 40° |
| Storage Temperature | – 20 ~ 55° |
| Humidity | 5 ~ 95% Non-condensing |
Unpack Your IPPBX
Thank you for purchasing SIPDEX M-200 IPPBX. This Quick Installation Guide will introduce how to finish the basic setting of connecting the web management interface and the Internet. Open the box of the IPPBX system and carefully unpack it. The box should contain the following items:
- Internet Telephony PBX System Unit x 1
- Quick Installation Guide x 1
- Power Adapter x 1 (12V)
- RJ-45 x 1
- Bracket x 2
If any of the above items are damaged or missing, please contact your dealer immediately.
Dimensions
- Dimensions: 343 (L)x 154 (W)x 35 (H)mm
- Net Weight: 1.4kg (without package)
Front Panel
LED definitions
| Front Panel | State | Description |
| PWR | Steady GreenOff | IPPBX Power ONIPPBX Power OFF |
| SYS | Blinking GreenOff | System is workingSystem is Off |
| ETH | Steady RedOff | IPPBX network connection establishedWaiting for network connection |
| FXO / GSM | Steady RedFlashingOff | Ready / StandbyRingingModule not available |
| FXS | Steady GreenFlashingOff | Ready / StandbyRingingModule not available |
| T1 / E1 | LED 1,2,4Steady in Red | Configured to T1 / E1 |
| USB | Steady Green | Connected External Disk |
Rear Panel
| Reset | The reset button, when pressed, resets the IP PBX without the need to unplug the power cord. |
| 12V DC | 12V DC Power input outlet |
| ETH | The ETH port supports auto negotiating Fast Ethernet 10/100 Base-TX networks. This port allows your IP PBX to be connected to an Internet Access device, e.g., router, cable modem and ADSL modem through a CAT.5 twisted pair Ethernet cable. |
| Console | For Console Interface configuration |
| USB | For External USB Storage |
| SLOT1 | support 4FXS 4FXO 2FXOS 2GSM 4SGM 1PRI |
| SLOT2 | support 4FXS 4FXO 2FXOS 2GSM 4SGM |
Accessories
Adopting an innovative modular design, it is very easy to add telephony ports to expand the Phone System.
IPPBX-M200 supports industry standard SIP trunks as well as analog PSTN trunks (FXO module), mobile GSM trunks (GSM module), analog stations (FXS module), as well as digital trunks (E1/T1 module).
SIP TRUNK Provider (Tested)
