You can define a label for the ring group. For example, you are the member of the sales ring group, and the label had been defined as “sales”; then if someone calls in and falls on this ring group, your extension rings and it will display sales and the caller number at the same time.
You can decide which conversation to be recorded during the call, just press feature code *1 then this call can be recorded; we call it one touch recording and is available on our Sidpex IP PBXs.
Chinese, English, French, Italian, Portuguese and Spanish are built-in by default; also other voice prompts can be implemented.
No, it cannot be changed; it’s the hardware that decides the port type, not software.
Yes, on Sipdex M200 IP PBX you can define a list of numbers for follow feature, and the call will be forwarded to the numbers listed one by one, till it’s been answered.
First of all, an Email account needs to be configured on the IP PBX with access code. Then others can send Email to this mail address with Fax file attached, and the mail title need to be the format: access_code=fax_number Then the built in mail server will check this account’s mail, if there’re emails with […]
We do not enable IAX2 protocol for the extensions by default, if you want to register IAX2 extensions you need to create new extension numbers with IAX2 protocol enabled, then you can register.
Available modules on each slot: Slot1: FXO/FXS/GSM/PRI/BRI modules Slot2: FXO/FXS/GSM modules
4FXO, 4FXS, 2FXOS, 2GSM, 4GSM, 1PRI, 4BRI, hardware echo cancellation, 3G UMTS modules
Many IP Phones can work perfectly with our IP PBX, as well as other IP Phones that support standard SIP/IAX2 protocol, e.g.: CISCO, Grandstream, Fanvil, Yealink, Polycom, Siemens, Snom, etc.
